XDIMAX Products Forum

HI, Something that I do not understand. You say: > 5- send 7 other bytes without deasserting the CS to read register X0 to Z1 (registers are consecutive) (1 command byte + 6 data bytes) and > then one for the whole 5 to 7 actions. It takes roughly 4.5ms, but the data is garbage since the CS is not d...

OK, I knew they are not stupid in Analog Devices and they took care about SUB-20 being connected to their IC ;-). Here is what you have to do. It is taken from page 14 of the manual To read or write multiple bytes in a single transmission, the multiple-byte bit, located after the R/W bit in the firs...

Don't worry it is not a big deal to make required customization. We did similar things before. (for example: http://www.xdimax.net/forum/viewtopic.php?f=2&t=120&start=0&hilit=pulse ) I would like first to see data sheet of ADXL345 to make sure we do not miss something. Is it correct one? www.analog....

That's right.

and it runs the program

Tell us what you want it to do and we will make a program that will run. How else SUB-20 can know what you want it to do without commands from PC.

What exactly do you want to do?
What interfaces do you want to connect?
And what features do you need in standalone mode?

How to get the trace? ------------------------- 1. Connect CoolMaster to your PC via RS232 port 2. Extract attached to this post d3dump.zip, it will create d3dump folder with following content: cygwin1.dll d3dump.bat d3dump38400.bat d3ttm.bat d3ttm2400.bat d3ttm38400.bat x232.exe 3. Go to d3dum fold...

HI,
You have to upgrade FW with SUB-20 FW Updater.
Look here:
viewtopic.php?f=2&t=31&start=0

You can use this link:
viewtopic.php?f=2&t=3#p353

Or simply go to download section on the web page:
http://www.xdimax.com/sub20/sub20.html#DLD

HI, 1) Since I am using SPI / J6 do I need to configure the SPI interface at all? If yes, what needs set? 2) Do I need to enable the SPI? 3) Do I need to provide an external clock? 1. No 2. No 3. No First of all tell me please what FW version do you have? Run <0> ./sub_app.exe --version XDimax LTD, ...

Hi, Sure you have to use reference voltage to make level converters work. Otherwise they can not know what specific voltage is required. Let's do it together: 1. Jumpers configuration: Set JP6 2-3 - External SPI voltage via J6.9 or DB9.3 http://www.xdimax.com/sub20/doc/HTML/jumpers.htm 2. Connect re...